For Sale Parts from Tecme, iQsub/Hammerhead, Dräger, GolemGear

A

Andreas

New Member
1) Tecme H0750, UNUSED. 3 cell sensor housing with male and female P-port connectors. With extra blank lid, and new BlueGlobe cable sealing gland. $190
The Tecme P0080, also sold below, can be fitted instead of the female P-port if preferred.
Photo

2) Tecme H0600, P-port 3-cell holder with cage and new BlueGlobe cable sealing gland. Without P-port $90. With P-port and nut $130
Photo

3) Hammerhead/iQsub ADV, WITH counterlung-fitting! $150.
Photo

4) Tecme P0080, UNUSED. converter male p-port thread to male p-port fitting. TWO of these! $40 a piece, or $70 for both.
Same thread as a female P-port, and can be mounted on a counter-lung with a normal P-port nut.
Photo

5) Dräger P-port female end, plus nut. UNUSED. $25
P-port Photo, Nut photo

6) Dräger P-port male plug. UNUSED. $10
Photo

7) Tecme EX0031, Ray hose extenders, special version for adding a half (cut) Ray hose to full-length ones. $20
Photo

8) Golem Gear Cordura loop hose covers/wraps, pair. 24" long. $15
Photo


All parts are in Florida. Can be delivered around High Springs or Tallahassee, or buyer pays for shipping.
 
Addition to the items for sale:
Golem Gear P-port adapter for 2nd Stage regulator.
Can be used for either using a normal regulator as an ADV, or for using with the Dräger full face mask.

$40, plus shipping (or delivery as mentioned above).

GolemGear_P-port_adapter_for_standard_regulator.jpg
 
Update:

5) Dräger P-port female end, plus nut - sold.

3) Hammerhead/iQsub ADV, WITH counterlung-fitting - sold.
 
You must log in or register to reply here.
Back
Top