THE UNIT HAS SOLD.
This X-CCR is designed and built by iQsub and distributed by SubGravity, it’s the latest in cutting edge rebreather technology. With CO2 monitoring and high-pressure sensors displaying diluent and O2 pressure on the primary handset, the X-CCR sets a new standard for the industry. The unit includes a radial scrubber, Shrimp bailout valve (BOV), removable O2 cell cartridge, QuickLoc attachments on all breathing hoses and on the BOV. Manual Addition Valves (MAVs) for both O2 and diluent, Automatic Diluent Valve (ADV), bayonet head fitting, 3 liter steel O2 and dil tanks, Back Mounted Counter Lungs (BMCLs), 6mm Stainless back plate, harness and wing, primary and secondary handsets, HUD, Metal Sub tank brackets, first stage regulators, and 3 O2 cells are all included as standard equipment. The electronics package consists of the world renowned Shearwater handsets, which interacts with the controller and main electronics package residing in the head of the unit (outside the loop). The Shearwater Petrel 2 handsets includes a digital compass.
Weight
70 lbs
Dimensions
28 x 18 x 18 in
I purchased the unit new from Sub Gravity in February. I started training and got three drives completed and ended up having a medical condition and had to stop the training. This month the doctors gave the bad news that I had to stop diving because of a condition called Immersion Pulmonary Edema so I’m selling the unit with all the extras ready to dive. I contacted Sub Gravity and the full warranty still applies and transfers over to the new owner.
The following is the build sheet:
Canister Size: Full Size (Expedition) Canister Material: Aluminum Scrubber Size: 8 lbs
Secondary PO2 Monitoring: Shearwater Petrel 2 with Standard Cable (Fischer connector and X-connector) ($880)
Counterlungs:Back Mounted Counterlungs
Upper Breathing Loop Hoses:11 Inch Rubber (standard)
Lower Breathing Loop Hoses:13 Inch Rubber (standard)
First Stages ($100.00): Apeks DS4
Cylinders: 2 x Faber 3 Liter (FX 23) Cylinder Color: white
Backplate ($75.00): 6mm Stainless
CCR Wing: 44 lb Donut
Harness ($40.00):
Adjustable Extras ($361.45): Oxygen Calibration Kit (reduces use of oxygen during calibration process - HIGHLY RECOMMENDED!), Canister Lid (preserves the scrubber while the head is removed from the canister), 1 x Spare PSR-11-39-SMB-SG Oxygen Cell (w/ Coax connector), 2 x spare rechargeable Li-ion Batteries, 3.7V / 3400mAh, 18650 size, CCR Buttplate (buttplate/bungee kit for side mounting bailout cylinders), Complete annual rebuild o-ring kit (including BOV)
Total Price as Configured: $11,956.45
I’m Asking $9600.00 plus shipping.
Also included is a travel hard case.
I also have a New Shearwater Nerd with one dive on it I paid $1999.99.
I’m selling it separately but will let it go with the X-CCR for $1600.00 manufactures warranty can be transferred to new owner.
Send me a PM if interested.
Thanks
John
THE UNIT HAS SOLD.
THE UNIT HAS SOLD
This X-CCR is designed and built by iQsub and distributed by SubGravity, it’s the latest in cutting edge rebreather technology. With CO2 monitoring and high-pressure sensors displaying diluent and O2 pressure on the primary handset, the X-CCR sets a new standard for the industry. The unit includes a radial scrubber, Shrimp bailout valve (BOV), removable O2 cell cartridge, QuickLoc attachments on all breathing hoses and on the BOV. Manual Addition Valves (MAVs) for both O2 and diluent, Automatic Diluent Valve (ADV), bayonet head fitting, 3 liter steel O2 and dil tanks, Back Mounted Counter Lungs (BMCLs), 6mm Stainless back plate, harness and wing, primary and secondary handsets, HUD, Metal Sub tank brackets, first stage regulators, and 3 O2 cells are all included as standard equipment. The electronics package consists of the world renowned Shearwater handsets, which interacts with the controller and main electronics package residing in the head of the unit (outside the loop). The Shearwater Petrel 2 handsets includes a digital compass.
Weight
70 lbs
Dimensions
28 x 18 x 18 in
I purchased the unit new from Sub Gravity in February. I started training and got three drives completed and ended up having a medical condition and had to stop the training. This month the doctors gave the bad news that I had to stop diving because of a condition called Immersion Pulmonary Edema so I’m selling the unit with all the extras ready to dive. I contacted Sub Gravity and the full warranty still applies and transfers over to the new owner.
The following is the build sheet:
Canister Size: Full Size (Expedition) Canister Material: Aluminum Scrubber Size: 8 lbs
Secondary PO2 Monitoring: Shearwater Petrel 2 with Standard Cable (Fischer connector and X-connector) ($880)
Counterlungs:Back Mounted Counterlungs
Upper Breathing Loop Hoses:11 Inch Rubber (standard)
Lower Breathing Loop Hoses:13 Inch Rubber (standard)
First Stages ($100.00): Apeks DS4
Cylinders: 2 x Faber 3 Liter (FX 23) Cylinder Color: white
Backplate ($75.00): 6mm Stainless
CCR Wing: 44 lb Donut
Harness ($40.00):
Adjustable Extras ($361.45): Oxygen Calibration Kit (reduces use of oxygen during calibration process - HIGHLY RECOMMENDED!), Canister Lid (preserves the scrubber while the head is removed from the canister), 1 x Spare PSR-11-39-SMB-SG Oxygen Cell (w/ Coax connector), 2 x spare rechargeable Li-ion Batteries, 3.7V / 3400mAh, 18650 size, CCR Buttplate (buttplate/bungee kit for side mounting bailout cylinders), Complete annual rebuild o-ring kit (including BOV)
Total Price as Configured: $11,956.45
I’m Asking $9600.00 plus shipping.
Also included is a travel hard case.
I also have a New Shearwater Nerd with one dive on it I paid $1999.99.
I’m selling it separately but will let it go with the X-CCR for $1600.00 manufactures warranty can be transferred to new owner.
Send me a PM if interested.
Thanks
John
THE UNIT HAS SOLD.
THE UNIT HAS SOLD
Last edited:
