Chris Kennedy
New Member
My Dolphin has sat under the bench for a couple of years gathering dust. I had sold off PPO2 meters, V4Tec tank mounts, Techme cell holder. Basically had loop,scrubber, lungs V4Tec backplate adapter and shell which I never got around to putting on ebay. All in all it seemed less effort to put it back into service than sell the bits. I never really liked the large cell holders stuck on the hose ends and extension on other side to balance it up . I decided to have one tall column entering exhale lung which contained ADV ,three cell holder and O2 inlet. This was not a departure from how I ran unit when I first closed it several years ago. I just incorporated the cell holder. PPO2 metering is now going to be by my Predator or Petrel. Next I made a set of adapters to screw onto one of my Golem BOV's and use the Drager DSV flapper valves. I had a spare set of Northern Diver mounts so fitted them and I have same mounting system on all my units. Wing ,backplate tanks regs and needle valve just swap from GAF just have to fit fisher cable and "IT'S BACK".Looking forward to getting acquainted again.
