New cool screen on CCR Liberty

[lof]

Check out the new screen that came with new firmware update for CCR Liberty. Everything you need to know to assess the health of your PPO2 measurement and sensors on one screen.
mV and PPO2 of O2 sensors, the indirect PPO2 measurement calculated from the He sensors right below, and the PO2 of your diluent flush on the bottom left.
Also a handy Deco screen (or multiple pages for some )

 

[tarpio]

Hello

Question : If you are with Air Diluent , does "Liberty" still display the Ppo2 of your diluent on this new screen ?
or it's only with trimix diluent via He sensor ?

Thanks in advance

 

[lof]

It will still display the PPO2 of your diluent flush in lower left.

 

[tarpio]

Ok not sure I understood...
if you do flush at 40 meters with air diluent, does it display Ppo2 value 1.05 on lower left ? Or 0.21 (air) ?

Envoyé de mon SM-G920F en utilisant Tapatalk

 

[tarpio]

I mean, does CCR Liberty display the current Ppo2 of the air diluent (on lower left) depending of the depth where you are ?
(like on the petrel dive computer)

Envoyé de mon SM-G920F en utilisant Tapatalk

 

[lof]

Yes it does.

 

[tarpio]

Ok I just tested the 2.7 yesterday ....very cool to have the Ppo2 diluent depending of the depth
But They should display with a bigger police....
Note or idea : have 1 more dive custom screen , where diver can select what they want to display


Envoyé de mon SM-G920F en utilisant Tapatalk