betti154
Member
This unit is in the following configuration:
AP Vision Head – Full trimix Software, CRP2 Battery Box
Temp stick
Back mount counterlungs
O2 & DIL manual add blocks
AP Harness – large (no weight packs)
AP – 22kg wing, basic inflator (no auto air)
Apeks first stages
Alibox
2 x 3L Faber cylinders (AP valves) – not in test
AUD$4500 – pickup/inspect Sydney, though happy to ship at buyer’s expense (including international).
Optional – Golem ShrimpBOV /w Inspo Hose ends & loop - $500
Owner of the unit is Mervyn Maher, though he’s moved overseas so I’m selling the unit on his behalf. Unit has been in storage for a few years, so does not have cells installed. Loop passes reasonable positive/negative tests and hoses appear in decent condition. Regs hold IP well, no obvious HP and LP leaks – HP & LP swivels orings just serviced. Wing is from an older unit so bit faded, but hold pressure fine.
We had cells in unit and Vision startup sequence runs fine (see video - no cells), though wiring looms seem stiff. As such, with a unit of this vintage it'd be worth a trip to AP service point to service/replace looms and probably get battery upgrade whilst there (in my opinion).
I’m open to selling unit without cylinders or BOV, just have to give primary buyer opportunity to opt out of those first.
Images available at https://www.dropbox.com/sh/8pwd5nz6ycj3xim/AAD_GmBlcLL83LR4KLS1WOuQa?dl=0
Regards, Damien Siviero
Ph: +61 414 460 992
Email: damien@siviero.com.au
AP Vision Head – Full trimix Software, CRP2 Battery Box
Temp stick
Back mount counterlungs
O2 & DIL manual add blocks
AP Harness – large (no weight packs)
AP – 22kg wing, basic inflator (no auto air)
Apeks first stages
Alibox
2 x 3L Faber cylinders (AP valves) – not in test
AUD$4500 – pickup/inspect Sydney, though happy to ship at buyer’s expense (including international).
Optional – Golem ShrimpBOV /w Inspo Hose ends & loop - $500
Owner of the unit is Mervyn Maher, though he’s moved overseas so I’m selling the unit on his behalf. Unit has been in storage for a few years, so does not have cells installed. Loop passes reasonable positive/negative tests and hoses appear in decent condition. Regs hold IP well, no obvious HP and LP leaks – HP & LP swivels orings just serviced. Wing is from an older unit so bit faded, but hold pressure fine.
We had cells in unit and Vision startup sequence runs fine (see video - no cells), though wiring looms seem stiff. As such, with a unit of this vintage it'd be worth a trip to AP service point to service/replace looms and probably get battery upgrade whilst there (in my opinion).
I’m open to selling unit without cylinders or BOV, just have to give primary buyer opportunity to opt out of those first.
Images available at https://www.dropbox.com/sh/8pwd5nz6ycj3xim/AAD_GmBlcLL83LR4KLS1WOuQa?dl=0
Regards, Damien Siviero
Ph: +61 414 460 992
Email: damien@siviero.com.au
Attachments
Last edited: