ADV sticking after Dil flush

Hodge Close · October 9th, 2012, 07:52 AM

The ADV sticks on when purging during Dil flush, this happens both on the surface and at depth. I've changed the diaphragm and checked the small rocker, but it still sticks "on" occasionally. Has anyone had this happen and how did you solve it. Any suggestions appreciated.

Stephen Mitchell BSc. Owner, Eden Brewery Ltd. Sent from my iPad

ccrdave · October 9th, 2012, 08:06 AM

Is the small spring behind the hose swivel still in place

Sent from my GT-N7000 using Tapatalk 2

***tecdiverdude*** · October 9th, 2012, 10:24 AM

Also it will free flow while ever the opv is above the adv and pulled open... I don't push the button when flushing, just roll a little to the right and pull the dump... Free flow flushes for me

Hodge Close · October 9th, 2012, 11:54 AM

Quote: (Originally Posted by tecdiverdude)

Also it will free flow while ever the opv is above the adv and pulled open... I don't push the button when flushing, just roll a little to the right and pull the dump... Free flow flushes for me

Okay, thanks for that, I tend to roll to the left; shoulder down. Dave I've put a bit more tension in the spring and it appears to have done the trick. Once again thanks guys for the prompt response. Steve

Flose · October 24th, 2012, 08:44 PM

How did you put more tension on the spring?

***nickb*** · October 24th, 2012, 09:13 PM

You could try screwing down the tilt boss, although they should be screwed almost completely in when set.

Stretching the spring might help a bit, as would packing it out with some shimming. I believe there are two different levers available from JJ, one of which gives the ADV a greater resistance.

Hodge Close · October 24th, 2012, 10:36 PM

Quote: (Originally Posted by Flose)

How did you put more tension on the spring?

I just stretched it a bit and it stopped it from sticking open.

October 9th, 2012, 07:52 AM	#1 (permalink)
Hodge Close I own a Brewery Join Date: Mar 2012 Location: Cumbria Posts: 64 Thanks: 5 Thanked 4 Times in 4 Posts	ADV sticking after Dil flush The ADV sticks on when purging during Dil flush, this happens both on the surface and at depth. I've changed the diaphragm and checked the small rocker, but it still sticks "on" occasionally. Has anyone had this happen and how did you solve it. Any suggestions appreciated. Stephen Mitchell BSc. Owner, Eden Brewery Ltd. Sent from my iPad
(Offline)

October 9th, 2012, 08:06 AM	#2 (permalink)
ccrdave New Member Join Date: Mar 2012 Location: forest of Dean Posts: 206 Thanks: 0 Thanked 6 Times in 5 Posts	Is the small spring behind the hose swivel still in place Sent from my GT-N7000 using Tapatalk 2
(Online)

October 9th, 2012, 10:24 AM	#3 (permalink)
*tecdiverdude* Southern Moderation Join Date: Mar 2012 Location: Australia Posts: 424 Thanks: 58 Thanked 30 Times in 17 Posts	Also it will free flow while ever the opv is above the adv and pulled open... I don't push the button when flushing, just roll a little to the right and pull the dump... Free flow flushes for me __________________ "DREAM as though you'll live forever LIVE as though you'll die tomorrow"
(Online)

October 9th, 2012, 11:54 AM	#4 (permalink)
Hodge Close I own a Brewery Join Date: Mar 2012 Location: Cumbria Posts: 64 Thanks: 5 Thanked 4 Times in 4 Posts	Quote: (Originally Posted by tecdiverdude) Also it will free flow while ever the opv is above the adv and pulled open... I don't push the button when flushing, just roll a little to the right and pull the dump... Free flow flushes for me Okay, thanks for that, I tend to roll to the left; shoulder down. Dave I've put a bit more tension in the spring and it appears to have done the trick. Once again thanks guys for the prompt response. Steve
(Offline)

October 24th, 2012, 08:44 PM	#5 (permalink)
Flose New Member Join Date: Sep 2012 Location: Malmo Posts: 4 Thanks: 1 Thanked 0 Times in 0 Posts	How did you put more tension on the spring?
(Offline)

October 24th, 2012, 09:13 PM	#6 (permalink)
*nickb* The JJ Kid Join Date: Mar 2012 Location: Cardiff, UK Posts: 517 Thanks: 78 Thanked 90 Times in 62 Posts	You could try screwing down the tilt boss, although they should be screwed almost completely in when set. Stretching the spring might help a bit, as would packing it out with some shimming. I believe there are two different levers available from JJ, one of which gives the ADV a greater resistance.
(Offline)

October 24th, 2012, 10:36 PM	#7 (permalink)
Hodge Close I own a Brewery Join Date: Mar 2012 Location: Cumbria Posts: 64 Thanks: 5 Thanked 4 Times in 4 Posts	Quote: (Originally Posted by Flose) How did you put more tension on the spring? I just stretched it a bit and it stopped it from sticking open.
(Offline)