Fitting 3 Way Block and Blanking ADV - Page 2

matt · June 9th, 2012, 05:21 PM

Quote: (Originally Posted by KISS#183)

Hi Dave... My triple gas block with orifice arrived on Friday... I fitted it yesterday and am going to try it in the pool tomorrow. I have disconnected the ADV. Like you said I still have 2 means of adding dil... BOV and MAV on the block. I'm going to try it and see how I get on. Its integrated really well and looks nice and neat... I'll let you know how I get on..

Picture?

KISS#183 · June 9th, 2012, 05:30 PM

Quote: (Originally Posted by matthewoutram)

Picture?

Your wish :0)

Excuse the poor quality... Iphone quicky

matt · June 9th, 2012, 05:43 PM

Nice! Where does the OUT go to?

KISS#183 · June 9th, 2012, 05:49 PM

Its only got one out... so I've plumbed it into where the O2 goes into the head...

matt · June 9th, 2012, 06:34 PM

Nice. Thanks for posting - not seen one plumbed in before. And space for the off-board too.

Matt.

KISS#183 · June 11th, 2012, 02:07 PM

Well I had fun in the pool last night.... O2 is nice, just as before.. Dil add wasa lot slower than I thought it would be... I was expecting the same sort of pace as the wing inflator, but flow was very slow in comparison. It works ust as it should... so I'm happy to take it into open water... The Orifice is the same size as the one in the KISS Mav so... as yet I've not messed with the ip. Flushing up and down was easy and problem free... :0)

Dougyfresh · June 13th, 2012, 01:25 PM

I have the same block and the dil add is very fast.

Digger180 · July 29th, 2012, 10:51 PM

Hi Dave was just wondering how you got on without the adv. Ive been using my 3 gas mav for a few month now and never thought of blanking it off. But now i think about it ive usually just added manualy before the adv was needed. Plus its one less miflex hose to buy.

KISS#183 · July 31st, 2012, 07:46 PM

I've blanked my ADV off... Only done a few dives. But it's fine... I'm going to swap out the old flimsy ADV diaphragm with some heavy rubber... So I can leave my neg on longer.

Dave1w · August 1st, 2012, 01:34 AM

Quote: (Originally Posted by Digger180)

Hi Dave was just wondering how you got on without the adv. Ive been using my 3 gas mav for a few month now and never thought of blanking it off. But now i think about it ive usually just added manualy before the adv was needed. Plus its one less miflex hose to buy.

I'm stuck in the middle of a long move to Indonesia, so I haven't had a chance to dive the kiss yet. I have another little manifold on the way, so I may end up connecting it back up.

Dave

Sent from my iPad using Tapatalk HD

June 9th, 2012, 05:21 PM	#11
matt New Member Join Date: Apr 2012 Location: London Posts: 1,541 Thanks: 168 Thanked 74 Times in 60 Posts	Quote: (Originally Posted by KISS#183) Hi Dave... My triple gas block with orifice arrived on Friday... I fitted it yesterday and am going to try it in the pool tomorrow. I have disconnected the ADV. Like you said I still have 2 means of adding dil... BOV and MAV on the block. I'm going to try it and see how I get on. Its integrated really well and looks nice and neat... I'll let you know how I get on.. Picture?
(Offline)

June 9th, 2012, 05:30 PM	#12 (permalink)
KISS#183 New Member Join Date: Mar 2012 Location: Midlands Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts	Quote: (Originally Posted by matthewoutram) Picture? Your wish :0) Excuse the poor quality... Iphone quicky
(Offline)

June 9th, 2012, 05:43 PM	#13 (permalink)
matt New Member Join Date: Apr 2012 Location: London Posts: 1,541 Thanks: 168 Thanked 74 Times in 60 Posts	Nice! Where does the OUT go to?
(Offline)

June 9th, 2012, 05:49 PM	#14 (permalink)
KISS#183 New Member Join Date: Mar 2012 Location: Midlands Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts	Its only got one out... so I've plumbed it into where the O2 goes into the head...
(Offline)

June 9th, 2012, 06:34 PM	#15 (permalink)
matt New Member Join Date: Apr 2012 Location: London Posts: 1,541 Thanks: 168 Thanked 74 Times in 60 Posts	Nice. Thanks for posting - not seen one plumbed in before. And space for the off-board too. Matt.
(Offline)

June 11th, 2012, 02:07 PM	#16 (permalink)
KISS#183 New Member Join Date: Mar 2012 Location: Midlands Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts	Well I had fun in the pool last night.... O2 is nice, just as before.. Dil add wasa lot slower than I thought it would be... I was expecting the same sort of pace as the wing inflator, but flow was very slow in comparison. It works ust as it should... so I'm happy to take it into open water... The Orifice is the same size as the one in the KISS Mav so... as yet I've not messed with the ip. Flushing up and down was easy and problem free... :0)
(Offline)

June 13th, 2012, 01:25 PM	#17 (permalink)
Dougyfresh New Member Join Date: Mar 2012 Location: New York Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	I have the same block and the dil add is very fast.
(Offline)

July 29th, 2012, 10:51 PM	#18 (permalink)
Digger180 New Member Join Date: Jul 2012 Location: Glasgow Posts: 11 Thanks: 4 Thanked 0 Times in 0 Posts	Hi Dave was just wondering how you got on without the adv. Ive been using my 3 gas mav for a few month now and never thought of blanking it off. But now i think about it ive usually just added manualy before the adv was needed. Plus its one less miflex hose to buy.
(Online)

July 31st, 2012, 07:46 PM	#19 (permalink)
KISS#183 New Member Join Date: Mar 2012 Location: Midlands Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts	I've blanked my ADV off... Only done a few dives. But it's fine... I'm going to swap out the old flimsy ADV diaphragm with some heavy rubber... So I can leave my neg on longer.
(Offline)

August 1st, 2012, 01:34 AM	#20 (permalink)
Dave1w Site Sponsor Join Date: Mar 2012 Location: Jakarta Posts: 133 Thanks: 1 Thanked 4 Times in 4 Posts	Quote: (Originally Posted by Digger180) Hi Dave was just wondering how you got on without the adv. Ive been using my 3 gas mav for a few month now and never thought of blanking it off. But now i think about it ive usually just added manualy before the adv was needed. Plus its one less miflex hose to buy. I'm stuck in the middle of a long move to Indonesia, so I haven't had a chance to dive the kiss yet. I have another little manifold on the way, so I may end up connecting it back up. Dave Sent from my iPad using Tapatalk HD
(Online)